Used ANYCUBIC 3D Printer LCD Photon Mono X 6K Photon M3 Max Wash and Cure A Lot

Description

Used ANYCUBIC 3D Printer LCD Photon Mono X 6K Photon M3 Max Wash and Cure A Lot
Notice:
This listing is for sale of used (Second-Hand) 3D Printer
1. We offer Anycubic company after-sale technogy supportbut we just only provide free after-sales support, no free after-sales replacement.
2.
This machine hasn't been repaired, we can't make sure which parts missed, and we don't accept return please notice.
3. We welcome buyers who are good at 3D printer and buy it at lower prices, thank you!
Photon M3 Max
Photon M3
Photon Mono X 6K
Photon Mono 4K
Photon Mono X
LCD Type
13.6 inch Monochrome LCD(7K )
7.6 inch Mono LCD
9.25 inch Mono LCD
6.23 inch Mono LCD
8.9 inch Mono LCD
Build Area
11.8'' x 11.7'' x 6.46''
298x164x300mm
7.08" × 6.45" × 4.03"
180×163.9×102.4mm
7.8'' x 4.8'' x 9.6''   197x122x245mm
6.5"x 5.2"x 3.1"
132x80x165mm
7.55"x4.7"x9.6" 192x120x245mm
XY Resolution
6480 x 3600 (7K)
4098 x 2560(4K)
5760 x 3600 (6k)
3840x2400 (4K)
3840x2400 (4K)
Layer thickness
0.01-0.15mm
0.01-0.15mm
0.01-0.15mm
0.01-0.15mm
0.01-0.15mm
Z Axis Accuracy
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Printing Speed
60mm/h
50mm/h
80mm/h
50mm/h
60mm/h
Materials
405nm UV-Resin
405nm UV-Resin
405nm UV-Resin
405nm UV-Resin
405nm UV-Resin
ANYCUBIC
Photon M3 Max
ANYCUBIC 13.6" 7K Photon M3 Max Resin 3D Printer
Amazing Build Volume | High resolution | Anycubic Auto Resin Filler
Slicer software: ANYCUBIC Photon Workshop (free)
Light source: Parallel matrix (LED lights x 84)
Control panel: 4.3" resistive touch-control
Z-axis: Dual guide rails
Build plate: Laser engraved platform
Anycubic Auto Resin Filler module: Intelligent resin filling and stopping
Screen protector: Replaceable anti-scratch film
Leveling: 4-point manual leveling
Power supply: rated 120W
Data input: USB-A 2.0
Machine weight: ≈ 21 kg/46.3 lb.
Machine dimensions:59.6 x 40.0 x 40.8 cm /38.3 x 22.7 x 22.2 in. (HDW)
Printing speed: ≤ 50mm/hr
Printing volume: 14.7 L/498.5 oz.
Printing size: :30.0 x 29.8 x 16.4 cm 13.0 x 11.7 x 6.5in. (HDW)
Imagination without Boundaries
Equipped with the industry's first 13.6 inch large screen, have more space and more precision, unleash your creativity and a whole new world of display
Unleash Your Imagination
Anycubic Photon M3 Max resin 3d printer upgraded building size, reach to 298*164*300mm, similar dimensions to No. 5 Rugby. Large build volume leaves more space and freedom
Sharp Details Everytime
Contrast ratio up to 450:1, 125% higher than other resin printers (200:1), improves the details
Protect what matters
Add dedicated and replaceable screen protector to protect the premium 13.6'' 7K screen and feel relief.
Save More Precious Time
The fastest printing speed can reach 60mm/h, and it only takes 2 hours to print the 12cm high miniarure, which is 1 hour less than the 3 hours printing of other resin printers.
Foundation is the Key
Repeatedly designing and testing laser engraved platform can significantly increase the adhesion of the platform and improve the success rate of printing.
ANYCUBIC
Photon M3 Plus
Technical Specifications
Exposure screen: 9.25 inch monochrome screen
Printing volume: 5.9 liters / 199.1 ounces
Print size: 24.5 x 19.7 x 12.2 cm
Printing platform: Laser engraved aluminum
alloy   platform
Light source: Parallel matrix light source
(40 LED   beads)
Machine leveling: 4-point manual leveling
Printing accuracy: 6K (5,760 x 3,600 pixels)
Printing speed: ≤10cm/hour
Control panel: 5-inch resistive touch screen
Data input: USB-A 2.0 & 3.0 interface
Power supply: On/Off switch
Rated power: 144W
Machine dimensions: 47.5 x 36 x 29 cm (HW)
Machine weight: ~12kg
ANYCUBIC
Photon M3
Technical Specifications
LCD screen: 7.6 inches monochrome screen
Printing accuracy: 4,096 x 2,560 pixels
Printing volume: 2.99 l / 101.19 oz
Light transmittance: 4%
Contrast ratio: 400:1
Light source: parallel matrix light source
Printing platform: laser-engraved aluminum alloy platform
Printing speed: ≤ 5 cm /1.97 inches per hour
Control panel: 2.8-inch resistance touch screen
Data input: USB-A 2.0 interface
Rated power: 55W
Print size: 18.0 x 16.3 x 10.2 cm / 7.1 x 6.4 x 4.0 inches
Machine size: 42.5 x 26.9 x 25.6 cm / 16.7 x 10.6 x 10.1 inches. (HLW)
Machine weight: 7 kg / 15.4 LBS
ANYCUBIC
Photon Ultra
Technical Specifications
System: ANYCUBIC Photon Ultra
Color touch screen: 2.8 inch
Slicer: ANYCUBIC Photon workshop
Connectivity: USB
Printing technology: DLP (Digital Light          Processing)
Light source: DLP optical projector
Resolution: 1280 * 720
XY resolution: 80um (0.080mm)
Z axis resolution: 0.01mm
Layer res.: 0.01 ~ 0.15mm
Print speed: 1.5S / layer Max 60mm/h
Rated power: 12W
Printers size: 222mm (L) * 227mm (W) * 383mm (H)
Build volume: 102.4mm (L) * 57.6mm (W) * 165mm (H)
Net weight: ~ 4kg
Desktop DLP® 3D Printer
Anycubic Photon Ultra is a groundbreaking consumer DLP 3D printer. Anycubic co-engineered with Texas Instruments to introduce Digital Light Processing (DLP) technology into the desktop 3D printer industry.
DLP vs LCD
DLP Projector can project a beam of higher uniformity, and the light uniformity of the forming surface is greater than 90%. With an LCD printer, the light source is always on, which gives light leaks, even on dark pixels.
Durability
Thanks to DLP® technology, Anycubic Photon Ultra's light source system does not need to be replaced as often as an LCD 3D printer and has a life span of over 20,000 hours, 10 times longer than the 2,000 hours for LCD monochrome screens.
Energy Saving
The rated power of Photon Ultra is as low as 12W, which is about the power of a normal light bulb and only 1/5 of the 60W power of an LCD 3D printer.
Blazing Fast
The Ultra's blazing-fast optics engine speeds up the printing process to just 1.5 seconds per layer, 1/5 of the original Photon of 8 seconds per layer. The print speed is up to 6cm per hour, three times faster than the original Photon of 2cm per hour.
Whisper Quiet Printing
DLP printers release less heat due to its low power consumption. The heat dissipates through a radiator without containing a cooling fan to ensure a whisper quiet printing environment for users.
ANYCUBIC
Photon Mono 4K
Technical Specifications
Exposure screen: 6.23’’ monochrome
Printing dimensions: 6.5 x 5.2 x 3.1 in. /
16.5 x 13.2 x 8 cm (HWD)
Light transmittance: 7%
Contrast ratio: 400:1
Light source: Parallel matrix (LED x 15)
Power density: 3,500 - 4,000 μw/cm²/23,905 - 27,320 lux
Printing accuracy: 3,840 x 2,400 px (4K)
Suggested layer thickness: 0.01 - 0.15 mm
Horizontal resolution: 35 μm
Printing speed: ≤ 5 cm/hr. / 1.97 in./hr.
Control panel: 2.8’’ TFT touch-control
Data input: USB-A 2.0
Power supply: 45W
Software: Photon Workshop
Machine dimensions: 15.1 x 8.9 x 8.7 in./
38.3 x 22.7 x 22.2 cm (HWD)
Machine weight: 9.4 lb./4.3 kg
ANYCUBIC
Photon Mono X 6K
Technical Specifications
Exposure screen: 9.25’’ monochrome
Printing volume: 199.1 oz. / 1.6 gal. / 5.9 L
Light transmittance: 6%
Contrast ratio: 350:1
Light source: Parallel matrix (LED x 40)
Power density: 5,000 - 6,500 μw/cm² / 34,150 - 44,395 lux
Printing accuracy: 5,760 x 3,600 px (6K)
Horizontal resolution: 34 μm
Printing speed: Max 80mm/h
Control panel: 3.5’’ TFT touch-control
Data input: USB-A 2.0 / LAN
Power supply: 120W
Screen area: 38.22 in² / 248.75 cm²
Machine dimensions: 18.7 x 11.4 x 10.6 in. / 47.5 x 29 x 27 cm (HWD)
Machine weight: 24.3 lb. / 11 kg
ANYCUBIC
Wash Cure Machine Plus
Technical Specifications
Machine: Wash and Cure
Control method: Digital tube, LED indicator, Control knob
Rated power: 40W
Input voltage: AC110/240V 50/60Hz
UV lights: 405nm
Time selection: 1-60min
Machine size: 290mm(L)*270mm(W)*479mm(H)
Basket washing size: 192mm(L)*120mm(W)*290mm(H)
Hanging cleaning size: 192mm(L)*120mm(W)*235mm(H)
Curing size: 190mm(D)*245mm(H)
Weight: ~6.5kg
Upgraded UV Lamp Beads
Added with optical lens in every UV light, the UV light source can achieve more even irradiation and thorough curing.
L-shaped Strip Light
The L-shaped strip lights design make the top UV lamp adjustable, solving the problem of model top part curing.
360° Rotating Curing Platform
The curing platform rotates 360 degrees which always has a perfect even cure when finished and ensure even coverage.
Much Safer to Use
Curing will be stopped automatically when cover removed to prevent UV light from causing harm to the human body.
Closed Cleaning
Able to be washed thoroughly, and completely prevent the detergent from splashing, much safer for washing.
Concise User Settings
The time can be adjusted: 1-60 minutes, allowing you to adjust the cleaning & curing time based on your specific needs.
On Nov 10, 2022 at 19:31:24 PST, seller added the following information: