USA Stock! Original Prusa i3 MK3S+ 3D Printer Kit w/2-Sided Spring Steel Sheet

Description

Introduction of the ORIGINAL PRUSA I3 MK3S + 3D printer!
The Original Prusa i3 MK3S + is the latest version of our award-winning 3D printers.
We upgraded the MK3S with a
brand new SuperPINDA probe
for improved first layer calibration, added high quality
Misumi bearings
, and made various useful design improvements to make the printer easier to assemble and maintain.
The MK3S + contains
all the proven functions of the previous models
, including the heating bed with removable PEI spring steel pressure plates, automatic cot compensation, filament sensor, power failure recovery (power panic) and safety functions.
And it's
still as quiet as ever!
The MK3S + is available as a kit
, which is the best way to get to know your new 3D printer.
Assemble it screw by screw and you'll really learn all about its design and
how it works
!
You can also get it fully assembled and factory-tested, so all you have to do is unpack it and connect it.
Thanks to all of these (and many other) features,
the MK3S became the "Best 3D Printer" according to
ALL3DP
.
The MK3S is also
the highest rated 3D printer
and "Editor's Choice" in the renowned MAKE: MAGAZINE's Digital Fabrication Guide 2019. The MK3S is also in
TechRadar's Best 3D printers of 2021
as
The best all-around 3D printer.
NY Times
wrote that
"... of the 11 printers we've tested in the past five years, the Prusa i3 MK3S printer produced the largest, best-looking prints."
According to
ZDNet
,
the MK3S is
"The Best Pro-Sumer 3D Printer Under $ 1000."
The functionality of the MK3S + can be expanded with our
unique Multi-Material Upgrade 2S
for printing with up to 5 filaments at the same time
.
Our printers have won many awards over the years and we are working hard to make them even better!
What's new on the MK3S +
SUPERPINDA SENSOR
The SuperPINDA sensor has a high quality sensor for a
fully automatic bed
leveling
process
.
Before each print, the MK3S + scans the bed at several points and creates a
virtual height map of
the print area.
This process ensures that
the first layer is always on point!
MISUMI CAMP & MORE
The MK3S + features a new set of metal clips for the
genuine MISUMI bearings
on the Y-axis.
The belt tensioning mechanism on the X-axis was reworked and the X-end plastic parts reinforced.
The filament path in the extruder was altered for better support of flexible filaments.
DOZENS OF IMPROVEMENTS
With
all the cumulative upgrades
from the MK3's entire life cycle on board, the MK3S + is the best version of our award-winning 3D printer yet.
Real Gates belts, Bondtech drive gears, EINSY RAMBo motherboard, IR filament sensor and many more features are the reason why
the MK3S + is the perfect 3D printing workhorse
.
ON WHAT
WE ARE PROUD ...
The main features of the Original Prusa i3 MK3S +
REMOVABLE PRESSURE PLATES
Spring steel
sheets
are
easy to maintain and make removing the printed object from the printing surface a breeze
.
We offer three types of printing surfaces:
smooth, textured and satin
to meet all of your printing needs on a variety of different materials - most of which
do not require special
release liners
or surface preparation.
QUALITY PARTS
The MK3S + has an extruded Y-axis assembly made of aluminum.
Thanks to the milled dural frame, the MK3S + is stable, torsion-resistant and easy to assemble.
In combination with our self-developed extruder with
Bondtech gearbox and the E3D V6 Hotend
, the MK3S + can print high-quality objects up to a height of 210 mm.
BED LEVELING
Thanks to the sensor the SuperPINDA mk3 + can
crib leveling
method use to
microscopic irregularities of the printing plate
, and irregularities to be compensated by the assembly, and adding to the manufacturing tolerances of various parts caused.
Getting a
good first coat is quick and easy
.
RECOVERY IN THE EVENT OF A POWER FAILURE
Worried that a power outage will ruin your 48-hour printing?
Don't worry anymore - the MK3S + can handle it!
The printer can fully recover from the power failure
and continue
printing
right where it left off.
It detects power interruptions and switches off the heating bed and the extruder heating and saves the last known location.
FILAMENT SENSOR
The MK3S + develops the revised extruder from the MK3S.
The
built-in filament sensor
uses a reliable trigger system that detects whether a strand of filament has been inserted into the extruder.
It can recognize any type and color of filament and is insensitive to mechanical wear.
QUIET AND FAST
Thanks to the
Trinamic 2130 drivers and the super quiet fan
, the MK3S + supports the stealth printing mode, which
makes
the printer
extremely quiet
.
Even in normal print mode, the MK3S + is
quieter than most 3D printers on the market
.
In normal mode the MK3S + reaches a printing speed of more than 200 mm / s!
SLICING WITH PRUSASLICER!
Our internally developed multi-platform slicer comes with in-house
developed and fully tested profiles
for all of our 3D printers and a large selection of filaments.
With built-in tools such as
advanced support generation, cutting, automated object distribution, ironing
and many others, you can turn your 3D models into print files in no time!
SUPPORT FOR A VARIETY OF MATERIALS
The MK3S + is
fully compatible with a wide variety of different material types
.
Whether you want to print something out of PLA and flexible materials for fun, or
need to make
permanent prototypes out of PETG, ASA, polycarbonate, and polypropylene
, the MK3S + can handle them with ease.
Copy these links to your browser for related videos.
https://youtu.be/j0gT10x2trU
https://youtu.be/hwNIzQLtHnU
OPEN SOURCE HARDWARE & FIRMWARE
We develop firmware for all of our 3D printers and thoroughly test each new version before it is released.
Continuous development and regular updates
ensure that our devices are
packed full of useful functions
, such as pressure plate profiles, automatic calibration, leveling of the print bed, advanced diagnostics, estimation of the remaining printing time, Octoprint support and more!