UNIGATE CL-EI 2 Port Protocol Converter for DINrail

Description

UNIGATE CL-EI 2Port
DIN-rail module with seral interface - RS232, 422 and 485 on-board - to EtherNet/IP 2Port. Additional Debug-interface, Housing: sky blue RAL 5015
V3819
The reliable Protocol Converter for all devices with a serial interface
The Protocol Converter UNIGATE CL connects devices such as automation components via their serial interfaces to the required fieldbus or industrial Ethernet standard. RS232, RS485 and RS422 interfaces are on Board as a standard feature.
The communication between the serial side and the bus takes place either through the device configuration and a selection of the commercially available protocol, such as Modbus ASCII, Modbus RTU (Master or slave), 3964 (R) (e. g. for RK512) or the device is controlled by a script for protocols such as DIN measuring bus, DIN 19244 or other proprietary protocols.
This Script is created with the free PC tool,
‘Protocol Developer’
. You decide whether you want to program the Script yourself or hire Deutschmann Automation to do so.
A special feature of the UNIGATE CL series is Brand labeling. With the customized design Deutschmann Automation not only gives you the opportunity to pre-configure the device and choose different housing colors, you can also apply your own logo.
Technical Data
Dimensions
(WxDxH in mm)
23 x 115 x 111 (screw-plug-connector included)
23 x 117 x 100 (screw-plug-connector not included)
Weight
approx. 123 g
Protection class
IP20
Housing material
Polyamid
Mounting
DINrail (EN 50022)
Voltage supply
10 up to 33 Volt DC
Protection against incorrect polarity, short circuit and overload integrated
Current consumption (at +24V/DC)
typ. 100mA, max. 120mA
Operating temperature
-25°C (not condensing) up to +85°C
Storage/transport temperate
-40°C ... +85°C
Fieldbus Function
All specified EtherNet/IP functions
Technology
ASIC
Certifications
ODVA conformant, CE
Galvanic division
Standard on the bus side
Options
Galvanic division for the application side