Resin Flexible Plates 2 Sets for Anycubic M3 Plus/ Photon/ S / SE / Mono

Description

Product Description
Sovol Resin Flexible Plate135x80cm Anycubic Photon S / SE / Mono / Mono SE 2PCS
Flexible Plate Features
1. Stainless spring steel with high chromium content, easy to bend and clean, good corrossion resistance and prevent rust.
2. Hairline finish on surface makes the adhesive better, ensure the print successful. The other side is smooth without processing. Both sides etched for great part adhesion.
3. 2 easy lift tabs(handles) make it easier to remove the steel plate from the magnetic base.
4. Continuous printing with 2 Plates, start another print before you start cleaning the first!
Magnetic Base Features
1. Powerful magnet with alternating polarity to resist FEP suction.
2. Custom 3M adhesive impervious to resins and solvents. The 3M adhesive has strong viscosity and good adhesive at low temperature to make it hard to fall off after bonding with metal.
Materials Download
1.Contact with Seller to share the link
2.Click to download the STL file of a spacer to re-level your bed.
Package Content
2*Flexible Build Plats + 2*Magnetic Bases
Check the table below to ensure you’re getting the right size for your printer
FLEXIBLE STAINLESS SPRING STEEL BUILD PLATES FOR RESIN 3D PRINTERS
You know what’s frustrating about resin printing? The clean-up.
Removing prints without damaging either the print or the build plate is tricky. It’s all too easy to send your freshly-printed tabletop mini hurtling across the room with a misplaced jab of the spatula, only to have it crash to the floor, resting broken and sad in a puddle of slowly-curing resin.
Thankfully, there’s a solution; flexible build plates. Just peel them off the printer with the handy tabs, give them a wiggle, and pop! Your prints come straight off. Plus, if you have more than one flexible plate, you can start your next print while cleaning up your last. You’ll have that whole army of minis up in no time!
Getting started is easy; you attach a super-strong (alternating-polarity) magnetic base to the build plate of your favourite resin printer using the high-strength 3M adhesive supplied. It’s a special kind of adhesive that won’t react with resins and solvents but sticks super well to the metal of your build plate. Once the magnet is on and the adhesive is set, the stainless, spring-steel plate snaps right to it.
Re-level your printer to account for the added thickness, and you’re good to go! The stainless-steel has a high chromium content (that’s the magic ingredient of stainless-steel), which keeps it safe from the corrosive compounds in the resins; while the brushed texture of the stainless-steel ensures your print can get a good grip to it, to help prevent warping and failed prints.
Full Installation Instruction
Here is
a video
of the full installation process, which is also written below.