Rare Type A Machines Series 1 3D Printer W/Accessories - Low Hours 1728 in^3 Vol

Description

This awesome Type A Machines Series 1 FDM 3D printer was originally purchased direct from Type A Machines. Extruder head upgraded. Used for only a few hours of use making prototype parts, then stored in climate controlled room. Comes with some filament, filament holder, and accessories
(palette knife, glue stick, antenna, ceramic screwdriver, wrench kit, hardware bag, and Allen keys).
These printers have a huge build volume of up to 305mm x 305mm x 305mm- hypothetical build volume of 1728 cubic inches!
The heated bed is made of borosilicate glass and can reach temperatures up to 120 degrees Celsius in under 4 minutes.
These printers won numerous awards and are highly sought after even years after being discontinued. Here is your opportunity to get one that is nearly unused.
Checkout the Autochimps review of the Type A Machines Series One from May 2022 giving this machine a rating of 4.6/5, even compared to more recently released FDM machines.
Specifications:
Filament Diameter: 1.75mm
Hot End Type: Single piece
Nozzle Diameter: 0.4mm
Hot-End Max Temperature: 275°C (527°F)
Build volume: 1728 in3 (28.37 liters)
Build AreaX: 12.0” (305mm)
Build Area Y: 12.0” (305mm)
Build Area Z: 12.0” (305mm)
Layer Resolution Final: 50 Micron
Layer Resolution High: 100 Micron
Layer Resolution Normal: 150 Micron
Layer Resolution Low: 200 Micron
Layer Resolution Draft: 250 Micron
Positional Accuracy X/Y: 6.67 Microns
Positional Accuracy Z: 6.25 Microns
Print Speed: 50-150mm/s
Travel Speed: 150-250 mm/s
Width: 18.35” (765.75mm)
Height: 22.51” (571.80mm)
Depth: 18.05” (458.67mm)
Machine Weight: 30lbs (13.60kg)
Please ask all questions before bidding. Good luck and happy bidding!