Printrbot Simple Metal 3D Printer with X Axis, heated bed and Super Z 10"x6"x10"

Description

This auction is for NEW, CUSTOMIZED Assembled Printrbot Simple Metal Black with X Axis upgrade with HEATED BED, and SUPER Z upgrade. Upgrades are installed and print volume is increased to 600 cubic inches or 10"x6"x10" (X * Y * Z) . Printer without the upgrades has print volume of 6" * 6" * 6" or 216 cubic inches. I’ve listed item as used because 3D printers require a lot of work and printer was calibrated after it was upgraded.
Printer comes with power adapter, some PLA (various color) and is able to print using 1.75mm ABS and PLA filament. Printer is extremely easy to use. X Axis upgrade with HEATED BED is made is USA by Printrbot.  Super Z upgrade is made by Printrbot.  If you are using a heated bed, you will need an ATX power supply.  I can remove the upgrades if you want to receive the original box.  They can be re-installed in 15 minutes.  All of the hardware settings were changed in firmware.  Printer looks like picture number 1 - large area aluminum bed.  Pictures of Super Z upgrade are from number 2 to number 4, and pictures of regular printer are from number 5 to number 8.  This printer is using Cura software by Ultimaker.  You will need to load Cura profile (provided by Printrbot) and change X and Z settings to 250mm in software.
Product Description
Printrbot’s first all-metal 3D Printer. The metal construction combined with a GT2 belt pulley system produces a 3D print that rivals those of other manufacturers which cost thousands more!
Technical Specifications:
• Model: 1403
• Build Volume: 10″ x 6″ x 10″ / 250mm x 150mm x 250mm / 600 cubic inches (3 times bigger volume than stock 216 inches - 6"x6"x6")
• Print Resolution: 100 Microns
• Print Speed: 80mm/sec max recommended
• Filament: 1.75mm PLA (sample included)
• Extruder: Alu Extruder (direct drive) with 1.75mm Ubis Hot End with 0.4mm nozzle
• Auto Leveling: Auto-Leveling Probe works with software to calibrate Z axis height
• Print Bed: Not heated
• Construction: Powder coated steel and aluminum body with 8mm and 12mm diameter linear shaft
• Belt: GT2
• Pulleys: 20 tooth, dual flange GT2 aluminum
• Electronics: Printrbot Rev F Printrboard with micro-USB connection (cable included) and micro SD card slot for untethered printing
• Software: Printrbot does not provide software, but recommends Cura and/or Repetier. Both are available for free download.
• Power Requirements: 12V (6 amp) laptop power supply (included)
• Motors: NEMA 17 stepper
• Overall Footprint*: 22″ x 17″ x 13″ (L x W x H)
*Overall Footprint is the space needed to operate the full range of motion for the machine – X, Y, and Z axes travel.
Requirements:
• Assembly Required: No
Shipping:
• Weight: 16 lbs
• Dimensions: 14″ x 10″ x 16″ (L x W x H)
The Simple Super Z Upgrade increases the build volume of your Printrbot Simple to 150x150x250 (X, Y, Z).
Includes:
•12mm Smooth Rod, 15? length (x2, pressed into Z Rod Plate)
•1/4? Acme Rod, 290mm length
•Alu Handle for Simple
•hardware
Requirements:
•Printrbot Simple (Model 1403)
•Note: Some older Simples have a different hole pattern and will not be compatible with this upgrade, check our Assembly Instructions before purchase to make sure that your printer is compatible
Simple X Axis Upgrade with Heated Bed
Product Description
The Simple X Axis Upgrade increases the build volume of your Printrbot Simple to 10" x 6" x 6" (X, Y, Z).  If you want to print ABS in addition to printing larger, spring for the heated bed option.
Click here for installation instructions.
Click here for tips and configuration files for printing ABS.
Includes:
•Mic 6 aluminum bed (increases build volume to 10" x 6" x 6").
•Print Bed:  Heated (0.3mm level tolerance).  Max temperature – 80C
•8mm Smooth Rod, 345mm length (x2)
•X-axis Bar Ends (x2)
•GT2 Belt, 16? length
•hardware
•~240W 6? x 6? heat plate w/ wiring
•Kapton tape 
•Thermistor w/ cable 
•Radiant Barrier