KAIGE Light curing box 3D Printing Resin works Timed curing 235*225*230mm

Description

Note (read this manual first):
1. Please pay attention to electricity safety during operation! Do not use this product in humid environments such as bathrooms, bathtubs, and wash basins, or other places that are easily exposed to water.
2. When curing the model, please place the product on the rotating curing platform.
3. When not using this product, please cut off the power to prevent sudden fire.
4. Do not put the product where children can reach.
5. If the product fails, please pull out the plug from the socket first, and contact the after-sales service personnel.
Operation guide：
1. Turn on the power supply:
Plug the 12V, 1.5A power adapter that comes with this product into the mains socket first, then connect the DC line to the timer DC power socket, and the timer DC head to the DC power socket of the processing box. The processing box is powered on. Before any key operation, the processing box is in the standby state (not working).
2. Model loading:
After cleaning the printed model, put it into the processing box, close the lid of the processing box, and press the SET button to enter the working state. Carry out the secondary curing treatment of the model, and stop working when the set time value is reached.
3. Add and subtract duration:
The user can set the lighting duration of the processing box according to the size of the model. When the processing box is in the working state, press the minus time key (-) to decrease the time, and press the plus time key (+) to increase the time. Duration adjustment range: 1S~600S.
4. Door switch
When the timer is output, the processing box will stop working when the user opens the No. 6 board, that is, when the front panel is closed, and it continues to work when it is closed.
Product specifications:
1. Product size: 235(L)*225(W)*230(H)mm
2. Capacity: 170(L)*205(W)*155(H)mm
3. Product net weight: 1.2KG
4. Working environment:
4.1. Ambient temperature: 0℃~40℃.
4.2. Relative humidity: ≤90%.
5. Duration setting range: 1~600S
6. Power adapter specifications:
6.1 Input specifications: AC 90V~260V, 50/60Hz.
6.2 Output specifications: DC: 12V, 1.5A.
7. Type of light source: UV LED
8. Light source wavelength: 405nm
9. Number of lamp beads: 6
10. Rotation speed: about 10 revolutions per minute
11. Curable resin: rigid/tough/flexible/casting resin