Indian Challenger Motorcycle Cam Cover Headdress Background Decal/Sticker/Emblem

Description

Up for sale is a vinyl decal for the cam cover background area of the 2020-21 Indian Challenger with the PowerPlus 108 cu in liquid-cooled V-Twin engine.  The decal covers the black background area for the headdress portion of the cam cover.  The decal is cut to order from Oracal 651 Intermediate vinyl, that is a 7 year, 2.5 Mil vinyl, and comes in your choice of 47 different colors.  The decal is very easy to install,  and can be done in minutes.  The decal is NOT affected by the heat of the engine, in fact, the heat makes the decal bond like paint for many years of good looks.  The only enemy is Micro Fiber.  The best material for caring for your decals is soft cotton,  like old concert shirts turned inside out, or similar.
To install the decal,  start with a cool engine and clean hands.
1)  Apply one or two drops of soap solution, (three drops of Dawn dishwashing liquid, to 10-12 ounces of water), to the cam cover headdress black background area.
2)  Peel the backing off the background decal,  and then peel the decal from the transfer paper as you begin to apply the decal to the headdress background area.
3)  Slide the decal into the best position and blot out any fluid and air bubbles with a paper towel and your finger.
4)  Apply some gentle heat with a heat gun or hair dryer just to seat the decal.  Final bonding will occur when the engine is started and allowed to heat up.
5)  Once decal is installed and smoothed out,  start engine and idle for 10 minutes to bond decal completely.  Continuing to smooth out the decal while the engine is running is perfectly alright.  After decal is completely bonded,  turn off engine and allow engine to cool to room temperature.  That’s It.  Now your good to ride and wash bike as normal.
JUST REMEMBER……NO MICRO FIBER, and do not use a brush or pressure washer to clean.
Decal can be waxed and cleaned just like your paint surfaces.
If you ever wanted to remove the decal,  all you need is a little heat from a heat gun or hair dryer,  and the decal will stretch and peel off,  without even a trace of glue.
You will receive ONE decal in your choice of color for the cam cover background area,  SO PLEASE,  PLACE YOUR COLOR CHOICE IN THE
“Message To Seller”
,  AT TIME OF PAYMENT.
NOTE:  The Color Used In The Photo Is DARK RED.  ( It looks brighter because of the flash.)
All decals are cut when ordered and are considered “custom orders”.  Some orders may take longer to ship,  depending on color choice and quantity.
Custom Vinyl And Custom Color Orders,  Other Than Oracal,  Are Welcome.  Please Contact Me By Email For Pricing And Availability,  Before Placing Your Order.
( Example:  3M vinyl,  Avery vinyl,  Etc.)
All Orders Are Usually Completed And Shipped Within 24 Hours.  ( The Biggest Delays Come When No Color Choice Is Made.)
Orders are shipped USPS,  so item tracking may not be available.