Geeetech 3D Printer Prusa i3 Pro B Support 5 Filaments Acrylic DIY Parts

Description

Store category
Sign Up Now !
You may also like
Geeetech 3D Printer Prusa i3 Pro B Support 5 Filaments Acrylic DIY Parts
Product Description
Our Pro B can support auto leveling, but need buy our
3DTouch Auto bed Leveling Sensor
, click following link to buy!
https://www.ebay.fr/itm/222248852659
Note:
If your address belong to France, Italy, Spain, the printer will ship from
Belgium; other EU countries ship from Germany.
Our Pirnter has been updated! All Metal parts replaced printed parts!
___________________________________________________________________________
Our Pro B can support auto leveling,
but need buy our 3D Touch Auto bed Leveling Sensor.
Order 3D Printer, get 25% discount on 3D Touch: Here is the link for 3D Touch
https://www.ebay.fr/itm/222248852659
Introduction:
This Geeetech I3 pro B 3D printer is designed and manufactured by Shenzhen Getech Co., Ltd based on Geeetech I3 pro, except its simple assembly, easy debugging and more stable performance, compared with the I3 pro, I3 pro B features a newly added potential for 3D printing—support 5 types of filament: ABS, PLA, Wood-Polymer, Nylon and flexible PLA., create flexible hinges, joints, shaped parts; enable you to get the most out of your 3D Printer.
Features:
1. Multiple filaments compatible:
ABS/PLA/Flexible/PLA/Nylon/Wood-Polymer
, making 3D printing creativity more flexible.
2. New GT2560 control system, a perfect combination of Mega2560+Ramps1.4.
3. Further simplified structure means fast assembly and easy adjustment, which saves you both time and energy
4. Enhanced stability and reliability: 8- mm-thick acrylic plates and all metal carriages ensures more stable printing.
5. Paired with LCD 2004 panel & SD card reader, support stand-alone printing.
General Tips & Tricks for printing with Flexible and wood filament:
1.
The melting temperature is different for different type of filament; please refer to the suggested temperature you are using. The guideline for an optimal printing temperature is at approximately 210°C for flexible and 230°C for wood filament. The recommended heated bed temperature varies between ± 60˚C and ± 100˚C.
2.
It is recommended to significantly lower your printing speed (compared to printing with PLA, or ABS) when printing with Flexible filament and wood filament.
Specifications:
Printing specifications:
Print technology: FFF/FDM
Build volume: 200 x200x180mm
Layer resolution: 0.1-0.3mm
Positioning Precision: 0.1-0.3mm
Filament diameter: 1.75mm, 3mm
Nozzle diameter: 0.3mm, 0.35mm, 0.4 mm, 0.5mm
Filament type: ABS/ PLA/Flexible PLA/ Wood-Polymer /Nylon
Software:
Operating system: Windows/Mac/Linux
Control software: Repetier-Host, Printrun
File format: .STL. G-code
Temperature:
Max heated bed temperature: about 110°C
Max extruder temperature: about 240°C
Electrical:
Power supply: input: 115V/1.5A 230V/0.75A
output：DC12V/ 15A
Connectivity: USB, SD card (support off-line printing)
Mechanical:
Body: Acrylic plate of 8 mm thickness
Build Platform: Borosilicate glass + MK2A heatbed
XYZ Rods: Wear-resistant, stainless steel
Stepper Motors: 1.8° step angle with 1/16 micro-stepping
Physical structure: Reprap
Physical dimensions:
Without spool: 45 x 44 x 44 cm
With spool: 45 x 44 x 68 cm
Shipping box: 52 x 42 x 23 cm
Net weight: 8. 5 kg
Shipping weight: 9. 5kg
*A letter to our buyers*
Thank you so much for buying our printers, if you don't know how to use our printer, pls refer the information on our wiki,
If you need technical support, pls try our forum, sid=d1e3676198fb1527a8631b28e54301d8">Geeetech Forum
.
Thanks a lot!
___________________________________________________________________________
Package list:
The Printer will come as a unassembled kit, without a filament.
<
NO.
Name
Description
Qty
1
Smooth Rod
D8*L322mm Z
2
2
Smooth Rod
D8*L390mm
2
3
Smooth Rod
D8*L410mm X
2
4
Threaded Rod
M8*L300mm Z-axis screw
2
5
Threaded Rod
M10*L450mm
Y-axis
2
6
Washers
M2.5
5
7
Washers
M3
115
8
Washers
M4
5
9
Washers
M10
12
10
Nut
M2.5
4
11
Nut
M3
35
12
Nut
M4
6
13
Nut
M10
12
14
Lock nut
M3
5
15
Lock nut
M4
5
16
Wing nut
M3
6
17
Square nut
M3
34
18
Z-axis nut
Φ8
（
tin-bronze
）
2
19
Spring washer
M10
6
20
Screw locking ring
Φ8
8
21
Screw
M2.5x8mm
2
22
Screw
M2.5x16 mm
4
23
Screw
M3x6mm
25
24
Screw
M3x8mm
2
25
Screw
M3x10mm
15
26
Screw
M3x12mm
24
27
Screw
M3x16mm
32
28
Screw
M3x20mm
32
29
Screw
M3x30mm
14
30
Screw
M3x35mm
5
31
Screw
M3x40mm
5
32
Screw
M4x6mm
4
33
Screw
M4x25mm
2
34
Bolts
Countersunk head bolt M3x16mm
5
35
Spring
5
36
Linear Bearings
LM8UU
4
37
Linear Bearings
LM8LUU
2
38
Linear Bearings
LMH8LUU
2
39
Timing Belts
L1=775(Y axis)
1
40
Timing Belts
L1=860mm(X axis)
1
41
Bearing holder
Metal plate
2
42
Belt mount
Aluminium plate
1
43
Couplings
5-8mm
2
44
Pulleys
20 tooth d5mm
2
45
Driving wheel
2
46
Ball bearing
MR84zz
4
47
Spacer
With Aircraft type end
4
48
Dovetail clamp
4
49
Heat sink
9*10*5mm
4
50
Sticker
1
51
Belt bracket
1
52
Knob
For LCD
1
53
Fan
40x40x10mm 12V
1
54
DuPont cable
3-Pin Male-Female
1
55
USB Cord
A-B
1
56
End stop
blue/red/black
3
57
3D Power Cable
3*0.75 Square mm Switch Line
1
58
Power Cable
Control board power input
1
59
Heat bed set
With heating wire and Thermo-wire
1
60
Borosilicate glass
216mmx216mmx3mm
1
61
Power supply
Input: 115V/1.5A 230V/0.75A Output DC12V/0-15A
1
62
Stepper motor
4
63
Extruder
MK8 extruder
1
64
Control board
GT2560+4A4988
1set
65
LCD 2004
LCD2004
1
66
Nylon ties
30
67
Coil
3M
1
Acrylic Kits(8mm)
A1
XZ frame
I3-01
1
A2
Left side frame
I3-02
1
A3
Right side frame
I3-03
1
A4
Z motor fixed plate
I3-04
1
A5
Z motor fixed plate
I3-05
1
A6
Z motor support plate
I3-06
3
A7
Z motor support plate
I3-07
1
A8
Z top mount
I3-08
2
A9
Front support plate A of screw and smooth rod
I3-09
1
A10
Front support plate B of screw and smooth rod
I3-10
1
A11
Rear Support plate A of screw and smooth rod
I3-11
1
A12
Rear support plate B of screw and smooth rod
I3-12
1
A13
Y motor fixed plate
I3-13
1
A14
Y plate form connecting plate
I3-14
2
A15
Y platform support plate
I3-15
1
A16
Y bearing limit block
I3-16
4
A17
Acrylic washer
Fix the LCD panel
4
A18
LCD2004 frame
1
A19
LCD2004 frame holder
2
Metal Parts
M1
X-axis left end
1
M2
X-axis right end
1
M3
Print bracket
X belt and bearings
1
M4
Bearing Bracket
Sheet metal part
4
M5
Extruder bracket
1
Free add-on
F1
Ejector pin
1
F2
File
1
F3
Tool kit
Universal screwdriver
1
F4
Filament holder set
1
F5
Starter filament
About 3 meters
1
Payment
Delivery details
Return Policy
Terms of sales
Contact us
Payment
1.We accept PayPal only.
2.Payment must be received within 7 business days of auction closing.,or a unpaid case will be opened.
Delivery details
1.This 3D Printer will be sent by DHL, it will takes 5-7 business days to deliver.
If your address are a remote areas, you need to pay extra fees.
2.
Customs duties or taxes are buyer's resposibility for all of the listings
. Please check with your local customs office if you have any doubts.
3.Please confirm you are putting a correct and complete shipping address here.You are resposible for extra charge if your package been returned because of wrong address.
Return Policy
1.All returns are accepted.
2.You should contact us within 30 days after you received the item.
3.Return shipping will be paid by you.
Terms of sales
1.Customs duties or taxes are buyer's resposibility for all of the listings.Please check with your local customs office if you have any doubts.
2.Please confirm you are putting a correct and complete shipping address here. You are resposible for extra charge if your package were to be returned because of wrong address.
Contact us
1.We are always here for you,offering friendly, comprehensive customer service every step of the way. Please follow the good eBay practice to contact us if any doubts and problems.We sincerely hope our item and customer service can give you the BEST BUYING EXPERIENCE on eBay.
2.We believe nothing can solve problems but communication.Please contact our team via ebay message first before leaving any non-positive feedbacks if you feel unhappy here.
On Dec-13-20 at 22:01:03 PST, seller added the following information: