EPAX X1K 6" Mono Screen UV LCD 3D Resin Printer Parallel Light and 6" 2K Mono

Description

EPAX X1K 6" 2K MONO 3D PRINTER FEATURES
Parallel Matrix UV light source
-- This is the most advanced light source, providing more print detail for dental and jewelry applications where finer details are beneficial as well as a more even distribution of the light across the entire build area.
Light source closer to LCD screen - requiring less energy for printing and extending the life of your LCD screen.
3.5-inch Color TFT Touchscreen.
2K MONO (6 inch) LCD masking screen. 1620*2560 (2k) HD masking LCD allows for great print detail and much faster printing speed.  It typically only needs 2.5 to 3 seconds for normal exposure time, compared to color screen which needs 8 to 10 seconds.  Pixel size is 50 microns.
The mono screen uses SX04 interface to mainboard. It can last several thousands hours of normal use.
Improved Z-axis stability.
Pre-installed nFEP film to allow easier detachment during printing (you can still use standard FEP films with this printer if you prefer).
Sanded build platform surface made of soft aluminum for better adhesion and easier print removal.
Anti-Aliasing supported and enabled in installed firmware.
Wide selection of supported resins - you can use any 405nm wavelength 3D printing resins.
128mm (L) *81mm (W) *155mm (H) build volume.
Built on our successful X1 frame, with a slightly larger mid plate in order to fit 6" screen.
Orange Window with External Ethernet port installed.
Gently used in excellent condition with original box.