-40%
BELIMO ACTUATOR AMB24-RS AC/DC 24 VOLTS ( for control of damper surfaces )
$ 66
- Description
- Size Guide
Description
BELIMO AMB24-SRcontrol of damper surfaces
Proportional Control, Non-Spring Return, Direct Coupled, 24V, for 2 to 10 VDC and 4 to 20 mA
CONDITION. This actuator is new it was installed but never use which it has been tested and it works perfect
Technical Data AMB24-SR
Power Supply 24 VAC ± 20% 50/60 Hz 24 VDC ± 10%
Power Consumption 2.5 W (0.4 W)
Transformer Sizing 5 VA (Class 2 power source)
Electrical Connection 3 ft, 18 GA plenum rated cable 1/2” conduit connector
Overload Protection electronic throughout 0 to 95° rotation
Operating Range Y 2 to 10 VDC, 4 to 20 mA
Input Impedance 100 kΩ (0.1 mA), 500Ω
Feedback Output U 2 to 10 VDC (max 0.5 mA)
Angle of Rotation max. 95°, adjust. with mechanical stop
Torque 180 in-lb [20 Nm]
Direction of Rotation reversible with switch. Actuator will move: =CCW with decreasing control signal (10➞2V) =CW with decreasing control signal (10➞2V)
Position Indication reflective visual indicator (snap-on)
Manual Override external push button Running Time 95 seconds, constant independent of load Humidity 5 to 95% RH non condensing (EN 60730-1)
Ambient Temperature -22°F to +122°F [-30°C to +50°C]
Storage Temperature -40°F to +176°F [-40°C to +80°C]
Housing NEMA 2/IP54
Housing Material UL94-5VA
Agency Listings cULus acc. to UL 60730-1/-2-14 and CAN/CSA C22.2 No.24, CE according to 73 / 23 / EEC Noise Level <45dB(A)
Servicing maintenance free Quality Standard ISO 9001 Weight 2.2 lbs [1000 Kg]