1515 Work-Bee CNC Wood Router Machine Full Kit 4 Axis Precise T8 Leadscrew Drive

Description

1515 Work-Bee CNC Wood Router Machine Full Kit 4 Axis Precise T8 Leadscrew Drive
❤️+ Save This Seller to Enjoy a Menber Exclusive Coupon!
Latest Version
Work-Bee
1515
CNC Full Kit with Tingle Tension System 1500x1500mm
Bulk-Man 3D is the largest wholesaler of Open Source CNC parts to the world. By having the parts produced ourselves, or sourcing the parts directly from the factory, we eliminate the middle man and in doing so are able to provide the best wholesale price direct to the public!
The
Bulk Man 3D
Work-Bee Newest Version is based on the original WorkBee design by Ryan Lock of Ooznest. Our kit has some differences to the original design by Ryan including additional wheels and an
Upgraded Tension System
, which
allows for stronger and more reliable tension to be placed on the X and Y Axis lead screws, and helps to solve the " Whip" problem for long lead screws or faster Speed.
It is reliable based on
C-Beam, V-Slot, Xtreme Solid V-Wheels and TR8x8(P2) Leadscrews
. It has been carefully designed and can accurately cut foams, woods, plastics and aluminum to
0.1-0.2 mm accuracy
or better.
The Work-Bee CNC Machine is a 4 axis (3 + 1) machine, this means there are 3 physical axis (X,Y,Z) and a slave axis of Y which is called the A Axis. The Work-Bee CNC Machine uses specific lengths of Extrusions and Leadscrews.
With a Work-Bee CNC Kit you can manufacture functional engineering parts, toys, signs, or whatever you can imagine without leaving the workshop.
Advantage:
This kit is the latest version comes with a new Tension System to minimise Lead Screw ‘Whip’ !
The
1.5kW Air
,
1.5kW Water
or
2.2kW Water
Cooled Spindle Bundle contains all the hardware for mounting a the Spindle on your Work-Bee or other CNC machine.
The
Cable Drag Chain bundle
contains all the hardware for mounting Cable Drag Chains on your Work-Bee, Ox CNC or other CNC machine to help with cable management.
Our 6 CNC Controller Options are broken into 2 software categories： GRBL and Mach3/DrufelCNC.
GRBL Software based controllers:
xPRO V5
,
High Torque GRBL
,
MakerShield GRBL
Mach3/Drufel CNC Software based controllers:
UC300
,
NVUM
,
STB5100
These are the different software programs that are used to control the CNC Machine and send G-Code.
Our professional recommendation is the
xPRO V5
CNC Controller which is the most advanced GRBL CNC Controller of its class in the world. It has 6A silent stepper drivers, WiFi and off-line
options, and 4x faster than our other controllers. If you are confused about the different controller options,
options, and 4x faster than our other controllers. If you are confused about the
different controller options,
please
for more details!
Compatible Material for Cutting/Milling/Engraving:
Aluminium / Hard Wood / Soft Wood / Oak / Plexi Glass / Delrin / HDPE / Foam
Package Content
----------------------------------------------------------------------------------------------------------------------------------------------------------
Work-Bee CNC Mechanical Kit
4 x Nema23(
2.45N.m
) Stepper Motors
Cable Drag Chain Bundle
Z-Axis Touch Plate Probe
XYZ Touch Probe
Spindle Dust Cover Collector
Controller Bundle ( Choose 1 of 6 )
Spindle Bundle  ( Optional for 1.5kW Air
or
1.5kW Water
or
2.2kW Water Cooled.
Voltage range from
110V~250V
. We will
send 110V by default.
For
220V please leave us message
!
)
All Extrusions are M5 Tapped as where it is necessary.
For any customized request please feel free to contact us!
----------------------------------------------------------------------------------------------------------------------------------------------------------
Specs of Nema 23 Stepper Motor:
NEMA 23
Shaft Size: 1/4″
Step Angle: 1.8
Holding Torque: 2.45N.m
Rated voltage: 3.6V
Rated current: 3A
Specs of 1.5 kW Air/Water Cooled Spindle:
1.5kW Air Cooled Spindle Net weight: 2.6kg
1.5kW Air Cooled Spindle Spec: φ 65 x 205 mm
1.5kW Water Cooled Spindle Net weight: 4.2kg
1.5kW Water Cooled Spindle Spec: φ 80 x 205 mm
Power: 1.5 kW
Voltage: 220 ~250 V or 110 V
Frequency: 400 Hz
Speed: 8000-24000 R/min
Air/Water Cooling
Run-out off: less than 0.005 mm
Grease Lubrication
VFD Inverter 1.5 kW 220 V or 110 V
Collet: ER11 (15pcs/set, size from 1 mm to 7 mm)
Specs of 2.2 kW Water Cooled Spindle:
Net weight: 5.3kg
Spindle Spec: φ 80 x 215 mm
Power: 2.2 kW
Voltage: 220 ~250 V or 110 V
Frequency: 400 Hz
Speed: 0-24000 R/min
Water Cooling
Run-out off: less than 0.005 mm
Grease Lubrication
VFD Inverter 1.5 kW 220 V or 110 V
Collet: ER20 (28pcs/set, size from 1 mm to 13 mm)
Please note:
MDF Working Table and Drill Bits are
NOT
included with this kit.
We do not provide technical support for software debugging.
Mach3 License is not included with this kit. This License can be purchased directly from the official website.
Any Mains power connections must be installed by a Licensed electrician or suitability qualified person
Instruction Manual
is available via
Bulk Man 3D Resource Page (Message Us)
Look how The Work-Bee CNC Full Kit is Cutting our
Bulk Man 3D
Logo!
More Infomation
Z Travel Explained
The Work-Bee has two spoilerboard support configurations. One with a travel of 66mm, and a lower one with a travel of 106mm. The reason for the two configurations is that if the machine is always used to cut thin materials, for accuracy reasons it is better to have the work piece as close to the Z-Actuator as possible, so in this case the machine should be setup in the higher 66mm travel configuration.
The higher configuration has a Z travel of 66mm, with a 12mm spoiler board, this will reduce the Z travel to 54mm. In this case 54mm is maximum thickness of material that will fit on the machine.
To calculate the max cutting depth for a chosen piece of material it is:
Max Cutting Depth = Z travel – Material Thickness
For instance a setup with a 12mm spoiler board, the max Z travel is 54mm, so when cutting into a material 30mm thick the max cutting depth would be:
Max Cutting Depth = 54 – 30 = 24mm
This means with a 30mm piece of material it would not be possible to cut it the whole way through.
The max thickness that can be cut the whole way through is half the Z travel. So with a Z travel of 55mm, 27mm is the maximum thickness of material that could be cut the whole way through. And for the lower configuration the maximum thickness that can be cut the whole way through is 47mm.
Z Height
54mm Or 94mm Travel, 27mm Or 47mm Workable depth, with a 12mm spoilerboard. The spo
ilerboard support
s have two height configurations, these are the maximums for each configuration.
Motion
Drive System
- ACME Lead Screws Or GT3 Timing Belts
Linear Guides
- Polycarbonate wheels on anodised C-Beam V-Slot Extrusion.
Motors
- NEMA23 175oz Stepper Motors (X, Y & Z)
Accuracy
- 0.05 - 0.10mm (Screw Driven) Or 0.10 - 0.20mm (Belt Driven)
Note
Maximum recommended speed for Lead Screws 1000mm or greater is 400RPM.
Credit
" V-Slot " and " C-Beam " are registered trademarks of OpenBuilds LLC as released under the Creative Commons Licence "Attribution-ShareAlike"
All our components are designed to work and are fully compatible with the products produced by OpenBuilds.
"WorkBee" is a registered trademark of Ooznest Ltd and released under the Creative Commons Licence
Attribution-ShareAlike".
bella
bulkman3d.com
QueenBee PRO CNC Full Kit
Work-Bee Upgrades CNC Full Kit
LEAD CNC Full Kit
Payment
Delivery details
Terms of sales
Return Policy
Contact us
Payment
We accept 2 order forms:
Online order via eBay Store by PayPal
Offline order via PayPal Invoice or T/T
If you have problems on ordering via our eBay store, please do not hesitate to contact us, we will support you in the first time!
Delivery details
We can not arrange shipments on weekends or public holidays.
Orders will be dispatched within 2 - 5 business days after payment received.
After your order is shipped, you will receive the tracking number and also the tracking number will be added to your eBay order for you to track.
We can ship to you by UPS/DHL/TNT/EMS/Fedex,etc. We will choose the best shipping method for you,pls contact us if you have questions about shipping.
Please be advised that the international delivery time highly depends on your local customs and shipping services policy.
If your product has not arrived within the estimated delivery time, please contact us.
Terms of sales
Import duties, taxes and charge are not included in the product price or shipping charge. Those charges should be paid by the buyer.
We usually will mark the goods for a low cost on the customs declaration and we are trying to help you minimize or avoid GST or V.A.T or other import taxes. But we cannot guarantee no tax charge as it is depends on your country's policy.
Please NOTE that seller will not pay the local customs cost when the package arrive destination country.
Return Policy
We offer 30 day returns, efective or non-defective. Return must include all original package and accesorries, item must in good condition.
Defective item: customers first pay the shipping fee and ship back the item,we check and confirm,then we will offer refund.
Non-defective item: 30 days return, buyer need to pay for the returning shipping fee and tax, and we will offer refund your payment, but not include shipping fee.
Important Note: Once the goods are shipped and in transit, we DO NOT accept any cancellations and returns.
Contact us
We will work with you to until you are satisfied. we sincerely hope that you can leave us a
Positive Feedback& 5 Stars
If you are not satisfied with the items, please contact us first via Contact Seller. Your messages will be answered within 1-2 business day. We will try our best to solve your problem to your satisfaction.
Any other question welcome to contact us by eBay message.We are always here with you!
Our working time is
9:00AM - 6:00PM
from
Monday - Friday
.